eptesicus

I've had my truck for 7 months now, and just noticed that only the passenger side front door in my XLT Screw has the factory door sill protector on it. My driver's and both rear doors do not have them. I've heard of a couple other people missing them from their trucks.

Is this a common problem? I'll be going to the dealer this week to get it resolved.

Maniatiko

Any pics?

carryyourbooks

you need pix. not sure what you mean by sill protectors.

mikegs1952

Both front doors should have them. The back doors do not (at least on the xlt screw)

SteveVFX4

no Screws have them for the back. when they order the missing front one for you, have them order an extra set of the front ones and then you can trim them to fit the rears.

Flabioso

The only thing I can think of when you say door sill, If it's the plastic peace that has the f150 in print I have them on both side and on the back also, the ones on the back have a diamond plate pattern like the one from 04-08 did...

hemigod

They came from the factory on the fronts. I installed these over the paint on the 2 rear doors.

PN 91114 by Auto Ventshade (they're for 2004-2008 screws, but these worked for me on my 2010)
You can get them here, although the pic doesn't look like mine but mine are the same AVS part number
as this site shows: http://www.stylintrucks.com/parts.as...tfamilyid=2094
These seem a little more heavy duty than the factory ones on the front doors that cover the paint.

cdh7917

Do you have P/N's for those? I wouldn't mind adding them.

hemigod

I picked up a set for 2004-2008 supercrews, from an ebay seller if I recall correctly. I used the rear ones in the pic, and kept the front ones that I didn't need for a future vehicle.

cdh7917

How did you attach them? BTW, I am talking about the part that is over the painted sill, not the one above it that is part of the interior....