Anyone using a Snorkel
#1
Member
Thread Starter
Join Date: Nov 2007
Location: Houston
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Anyone using a Snorkel
I have been interested in trying to build a snorkel. Since I can't find a prefab kit....I was curious if anyone has attempted this already.
#2
Hey man I have been looking for a while as well. Everyone i have seen have been getto pvc and they are on beaters. For toyotas and land rovers even you can get ones that are moulded with the window and look really nice. Even the ones for the powerstrokes that go into the side air intake look really sweet. I refuse to getto up my truck so when I find one or a solution I will for sure post it. I would even pay up to 500$ for one including shipping at least.
I think one that would go up the corner but be shaped at the bottom like a v and wrap smooth around the front and side, be about 3" wide and 1.5" high would be enough flow for my 4.9 and still not block off too much vision. I dont know most likely dreaming.
holy crap you joined in 07 and have posted 16 times your a lurker! right on man.
I think one that would go up the corner but be shaped at the bottom like a v and wrap smooth around the front and side, be about 3" wide and 1.5" high would be enough flow for my 4.9 and still not block off too much vision. I dont know most likely dreaming.
holy crap you joined in 07 and have posted 16 times your a lurker! right on man.
Last edited by abycat; 01-21-2011 at 02:20 PM. Reason: crazy stat
#3
Just call me sean. Really
Spray some PVC black and you can run it along your hood and up your windshield frame
That's what I'd do. White PVC is tacky looking, but it can look good in black
That's what I'd do. White PVC is tacky looking, but it can look good in black
#4
I was thinking this quality and look. On the appropriate body style. just for example.
http://www.4by4connection.com/fosasn.html
http://www.4by4connection.com/fosasn.html
#5
I will be building a twin stack snorkel over the next few months out of ABS black drain pipe, heat resistant flex hose and rooftop dryer vents I'll post pix when she's finished!!
also gonna go with a Single 4" custom single stack exhaust in flat black...It's not diesel, but I need the exhaust further from the ground to match the snorkel!
also gonna go with a Single 4" custom single stack exhaust in flat black...It's not diesel, but I need the exhaust further from the ground to match the snorkel!
Last edited by MONSTERPRE; 01-21-2011 at 03:30 PM. Reason: exhaust
#6
That sounds cool. If thats your truck in your avatar I cant see you putting something ugly on it so Im sure the quality will be there. I would love to see pics when your done. Do you have the 4.9?. I wanted to stay away from round tubes and try to have one thats moulded and roundish. I guess contoured is the more appropriate word.
But If i decide to do a round one I think one 3" tube or even 2.5" would be the best for me. I wanted to use thin walled aluminum and weld the multiple cut pieces to form nice contours and have it fit the window perfect. Grind the welds down after and have a perfectly smooth pipe that I could polish or paint or whatever. Powdercoating it even would be cool. I think utilizing my stock box and having a plug for the hole in fender and a new top for a quick back to stock change would be cool. No mounts on the window just a pad for contact and concealed but sturdy supports in between the tube and fender would be awesome.
But If i decide to do a round one I think one 3" tube or even 2.5" would be the best for me. I wanted to use thin walled aluminum and weld the multiple cut pieces to form nice contours and have it fit the window perfect. Grind the welds down after and have a perfectly smooth pipe that I could polish or paint or whatever. Powdercoating it even would be cool. I think utilizing my stock box and having a plug for the hole in fender and a new top for a quick back to stock change would be cool. No mounts on the window just a pad for contact and concealed but sturdy supports in between the tube and fender would be awesome.
#7
wanna touch the hiney
Join Date: Jan 2011
Location: Meadows of Dan, VA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Member
Thread Starter
Join Date: Nov 2007
Location: Houston
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by abycat
Hey man I have been looking for a while as well. Everyone i have seen have been getto pvc and they are on beaters. For toyotas and land rovers even you can get ones that are moulded with the window and look really nice. Even the ones for the powerstrokes that go into the side air intake look really sweet. I refuse to getto up my truck so when I find one or a solution I will for sure post it. I would even pay up to 500$ for one including shipping at least.
I think one that would go up the corner but be shaped at the bottom like a v and wrap smooth around the front and side, be about 3" wide and 1.5" high would be enough flow for my 4.9 and still not block off too much vision. I dont know most likely dreaming.
holy crap you joined in 07 and have posted 16 times your a lurker! right on man.
I think one that would go up the corner but be shaped at the bottom like a v and wrap smooth around the front and side, be about 3" wide and 1.5" high would be enough flow for my 4.9 and still not block off too much vision. I dont know most likely dreaming.
holy crap you joined in 07 and have posted 16 times your a lurker! right on man.
#10
BAMF Club
Fab some up with mesh wire and cover it in fiberglass. It looks really good and custom. Way better than pvc.