Rim size?
#1
Rim size?
Hello all I Just picked up My first ford truck a 96 F150 XL long bed ext cab 4x4 in line 6 with a 5 speed and manual hubs, and I was wondering if any one knows if I will have enough clearance to go from the stock 15's to 16 rim size seeing as only 3 of my rims match right now and I found a set of 16 in rims with tires cheap
The following users liked this post:
Hoss120 (02-06-2013)
#5
Junior Member
Dodge half ton pickup rims are 5 on 5.5....as a matter of fact you cab go 16, 17 or 20's Not sure if they have 18's though. IIRC even 2013 ram pickups have 5 on 5.5
Ken Kilpatrick
2008 F150 FX4
Ken Kilpatrick
2008 F150 FX4
#7
It's a Canadian thing eh!
Center of the bolt hole to the center of furthest one away from it. But be careful when buying Dodge rims, same bolt pattern but the rims have a smaller hub size and won't fit unless they are bored out or they are custom rims.
For rim cross reference, check here.
http://www.roadkillcustoms.com/hot-r...UCK+2WD%2C+4WD
For rim cross reference, check here.
http://www.roadkillcustoms.com/hot-r...UCK+2WD%2C+4WD
Last edited by sylver91; 02-06-2013 at 09:29 AM.
Trending Topics
#8
member
I would ether take the rims to a tire store they could check the rim and tell you the correct
Pattern or you can take off one of your rims and see if the 16 rim fits your truck.
Pattern or you can take off one of your rims and see if the 16 rim fits your truck.
#9
if I remember right Jeep has the 5x51/2 pattern only prob is making sure my hubs would fit
but never mind the rims the guy had wont fit wrong bolt pattern so im back at square 1
but never mind the rims the guy had wont fit wrong bolt pattern so im back at square 1
Last edited by Hoss120; 02-06-2013 at 10:36 AM.