Exhaust flange
#1
Exhaust flange
I have a 94 and the exhaust flang whrre the pipe bolts to the manifolds is leaking... Just wondering if any1 had this problem and any good ways of removing the old rusty bolts.. Sort of afraid wont get them out if/when they break.. Thanks Ryan B
#4
I drilled mine out then replaced them with longer pieces of allthread and lock washers. The allthread allows you to use the bolts to pull the pipes back up instead of haveing to man handle them into place while you try to tighten everything up with your free hand.
#6
yea sorry nuts on both sides a flat washer and a lockwasher. to keep it in place once your done. remember to only screw the top bolt down a bit you wana try to keep most of the thread on the bottom flange. I can send you a picture if you need one.
Trending Topics
#8
some times that Y pipe or H pipe dosnt want to mate back up. With more thread on the bottom allows to manipulate that pipe back into place. useing the nut to move it up on the allthread.