axle ratio?
06-28-2011, 09:58 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2011
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
axle ratio?
I called ford, they told me it should be on the drivers side door on the sticker? i checked and under axle it says "19" ?? i told the guy from my local ford dealer this, and there was silence on the phone? then he said i could check the diff cover and there should be a little tag on one of the diff cover bolts, i checked, no tag.... how do i figure out which rear end i got?
06-28-2011, 10:06 AM
#2
Senior Member
Originally Posted by newfie25
I called ford, they told me it should be on the drivers side door on the sticker? i checked and under axle it says "19" ?? i told the guy from my local ford dealer this, and there was silence on the phone? then he said i could check the diff cover and there should be a little tag on one of the diff cover bolts, i checked, no tag.... how do i figure out which rear end i got?
06-28-2011, 12:22 PM
#4
It's a sticker sealed around the right axle housing . Here's mine. It's mirrored bc I had to use the front camera on my phone to get a good pic. But you can clearly see its a 9.75" ring , 3.75 ratio, limited slip.
06-28-2011, 12:30 PM
#5
Curmudgeon
newfie25, it sounds like you have a 3.55 non-limited slip.
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
06-28-2011, 12:33 PM
#6
Originally Posted by bb37
newfie25, it sounds like you have a 3.55 non-limited slip.
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
06-28-2011, 01:19 PM
#7
newfie25, it sounds like you have a 3.55 non-limited slip.
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
Trending Topics
06-28-2011, 02:08 PM
#9
Member
Join Date: Feb 2010
Location: Tennessee
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
newfie25, it sounds like you have a 3.55 non-limited slip.
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
p38fln, axle ratio is not coded in the VIN. However, you could use the VIN to look up the window sticker to see what the truck was built with.
geabis, there is no 3.75 ratio in F-150 axles.
In 2011, available axles and their codes are:
Non-limited slip: 3.15-15, 3.31-27, 3.55-19, 3.73-26
Limited slip: 3.15-A5, 3.55-H9, 3.73-B6
E-locker: 3.73-L6
06-28-2011, 02:28 PM
#10
Originally Posted by Smokinjo
There is also the 4.10 axle available on the 2011 F150 with E locker. I have it in my driveway. It's a Raptor.....but it's still a F150